Disclaimers

EU Declaration of Conformity

This product complies with the essential requirements of Radio Equipment Directive (RED) 2014/53/EU.

 

Federal Communications Commission (FCC) Regulation

The device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

 

RF Exposure safety

This device complies with the FCC RF exposure limits and has been evaluated in compliance with portable exposure condition.

In addition, the product shall be installed in a way that a distance of at least 20 cm is maintained between the antennas and the user’s body.

 

Modifications

Any changes or modifications made to this device that are not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

 

Innovation, Science and Economic Development Canada (ISED) Regulations

This Class ICES B digital apparatus complies with Canadian Innovation, Science and Economic Development Canada (ISED) ICES-003 regulations.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation of the device.

This device has been evaluated and shown compliant with the ISED RF Exposure limits under mobile exposure conditions. The distance between the antenna and the person’s body shall be greater than 20cm at all times.

This device has been certified for use in Canada. Status of the listing in the Innovation, Science and Economic Development’s REL (Radio Equipment List) can be found at the following web address:

https://sms-sgs.ic.gc.ca/equipmentSearch/searchRadioEquipments?execution=e1s1&lang=en

Additional Canadian information on RF exposure also can be found at the following web address:

http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html

 

Régulations Innovation, Sciences et Développement Economique (ISED) Canada

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement Economique Canada applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et

(2) l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Le présent appareil a été approuvé aux normes ISED concernant l’exposition humaine aux radiofréquences, à condition que la distance entre l’appareil et le corps humain soit plus grande que 20 cm.

Le présent appareil a été approuvé pour usage en Canada. On peut trouver la liste des équipements radio, approuvé par Innovation, Sciences et Développement Economique Canada, à l’adresse web suivante:

https://sms-sgs.ic.gc.ca/equipmentSearch/searchRadioEquipments?execution=e1s1&lang=fr

On peut trouver de l’information additionnelle concernant la conformité des appareils de radiocommunication aux limites d’exposition humaine aux radiofréquences à l’adresse web suivante:

http://www.ic.gc.ca/eic/site/smt-gst.nsf/fra/sf08792.html

If you have any questions regarding safety or use cased, please contact PipeBurst Pro via phone (866) 466-5325 or email: info@greenfielddirect.com

Don’t leave protection of your property to chance. Be proactive with PipeBurst Pro.

PIPEBURST PRO, THE HISTORY…

In 1976, KZCO began and entered the Agricultural market, manufacturing automated valves for fluid control systems. Over the next 46 years KZCO introduced over 30 “Firsts” in a variety of industries and it became known for innovative products based on solid market needs.

In 2010, KZCO started a new company, GreenField Direct, and invented the PipeBurst Pro. This added another high quality “First” in the leak and water protection market with features never before offered.

Today, PipeBurst Pro is continuing the focused effort on working in leak and water detection market, but still uses the guiding principles that have served our rock-solid foundation, since 1976. With PipeBurst Pro, you can be assured that the quality and ingenuity that built our history will continue in the PipeBurst Pro!

Fast Facts

Powered with ionleaks.com®

WaterValve approved for drinking water and outdoor use

High-tech sensors and proprietary control component

Security system integration

SUPERIOR WARRANTY

257-Warranty
We stand behind our products with a unique 2-year full warranty, 5-year actuated valve warranty and 7-year limited warranty.

Contact Us

Address: 23859 KZ Parkway #4 Greenwood, NE 68366

Phone: 866-466-5325

Fax 866-466-5325

E-Mail: info@greenfielddirect.com

Hours: 8am - 5pm CST (excludes major holidays)

Lora Alliance